Case 2 – Bridge with WDS (Wireless Repeater)
This example shows a configuration where one bridge relays all traffic wirelessly
from one bridge to another bridge. In the picture below Station1 is connected to the
wired LAN2 via Bridge2. Bridge1 act as a repeater between Bridge2 and Bridge3.
3Com Corporation
Choose the Wireless MAC address Bridge2 and Bridge3 in the Bridge1
Web interface WDS Links menu under the Configuration.
Choose the Wireless MAC address Bridge1 in the Bridge2 web interface
WDS Links menu under the Configuration.
Choose the Wireless MAC address Bridge1 in the Bridge3 Web interface
WDS Links menu under the Configuration.
Select the same radio channel for the three Bridges using the Radio page
under the Wireless Settings > Wireless Setup.
Page 51