3Com Corporation
Add Bridge in WDS manually:
When a WDS bridges is not shown in the WDS table automatically you can add it
manually by entering the MAC address of the remote Bridge. And then click on the
Add WDS Links button.
Follow the example to see how to configure a WDS.
Case 1 – Bridge with WDS (Wireless Bridge)
Create the Wireless Bridge between two wired networks: BRIDGE1 can be
configured to forward all data to BRIDGE2.
BRIDGE1 and BRIDGE2 need to be changed to Bridge1 and Bridge2. Illustration
figures need to be changed to reflect this as well.
Indoor:
Outdoor:
Choose the wireless MAC address of Bridge2 in the web configuration
interface of Bridge1, menu WDS Links.
Choose the wireless MAC address of Bridge1 in the web configuration
interface of Bridge2, menu WDS Links.
Select the same radio channel and the data rates for both Bridges using the
Radio page under the Wireless Settings > Wireless Setup.
Page 50