Emergency Start Function - Toyota Land Cruiser Prado Owner's Manual

■
The starter motor does not turn over, the interior lights and
headlights do not turn on, or the horn does not sound.
One of the following may be the cause of the problem:
● One or both of the battery terminals may be disconnected.
● The battery may be discharged. (→P. 599)
● There may be a malfunction in the steering lock system.
Contact your Toyota dealer if the problem cannot be repaired, or if
repair procedures are unknown.
Emergency start function (vehicles with a smart entry & start
system)
When the engine does not start, the following steps can be used as
an interim measure to start the engine if the "ENGINE START STOP"
switch is functioning normally.
Set the parking brake.
STEP 1
Put the shift lever in P (automatic transmission) or N (manual
STEP 2
transmission).
Set the "ENGINE START STOP" switch to the ACCESSORY
STEP 3
mode.
Push and hold the "ENGINE START STOP" switch for about
STEP 4
15 seconds while depressing the brake pedal (automatic
transmission) or brake and clutch pedal (manual transmis-
sion) firmly.
Even if the engine can be started using the above steps, the system
may be malfunctioning. Have the vehicle checked by your Toyota
dealer.
5-2. Steps to take in an emergency
5
593