Displaying the Bluetooth
Select "Device Name" using the "TUNE•SEL" knob.
STEP
1
Turn the "TUNE•SEL" knob to display the Bluetooth
STEP
2
address and name.
Select "Go Back" using the "TUNE•SEL" knob to return to
STEP
3
"System Setup".
Initializing the system
Select "Initialize" and then "Confirm" using the "TUNE•SEL"
STEP
1
knob.
Select "Confirm" again using the "TUNE•SEL" knob.
STEP
2
■
Initialization
●
The following data in the system can be initialized:
• Phone book
• Outgoing and incoming call history
• Speed dials
• Registered mobile phone data
• Security code
• Passkeys for the mobile phones
• Guidance volume
• Receiver volume
• Ring tone volume
●
Once the initialization has been completed, the data cannot be restored
to its original state.
■
When the phone book is locked
The following functions cannot be used:
●
Dialing by inputting a name
●
Speed dialing
●
Dialing a number stored in the call history memory
●
Using the phone book
3-3. Using the hands-free system (for mobile phone)
®
device address and name
®
device
3
405