2-2. Instrument cluster
● Setting the day mode
■
Setting up the display of the monitors
To set up the display, press the "DISP" switch when the camera
image is being displayed until the desired item appears.
If left idle for approximately 10 seconds, the display will revert to the previ-
ous screen.
● Setting the contrast
● Setting the brightness
224
Press the "∧" or "∨" switch to
select ON or OFF.
Press the "∧" or "∨" switch to
adjust the contrast.
+: Strengthen
-: Weaken
Press the "∧" or "∨" switch to
adjust the brightness.
+: Brighter
-: Darker