2-5. Driving information
Apply the brakes and keep them applied.
STEP
1
Have someone place wheel blocks under both the vehicle and
STEP
2
trailer wheels.
When the wheel blocks are in place, release the brakes slowly
STEP
3
until the blocks absorb the load.
Apply the parking brake firmly.
STEP
4
Shift into the 1st or R (manual transmission) or P (automatic
STEP
5
transmission) and turn off the engine.
● When restarting after parking on a slope:
With the transmission in the P position (automatic transmis-
STEP
1
sion) or the clutch pedal (manual transmission) depressed,
start the engine. On vehicles with an automatic transmission,
be sure to keep the brake pedal depressed.
Shift into 3, 2, 1, or the R position (if reversing).
STEP
2
Release the parking brake (also brake pedal on vehicles with
STEP
3
an automatic transmission), and slowly pull or back away from
the wheel blocks. Stop and apply the brakes.
Have someone retrieve the blocks.
STEP
4
CAUTION
■
To avoid an accident
●
Observe the legal maximum speeds for trailer towing.
●
Slow down and downshift before descending steep or long downhill
grades. Do not make sudden downshifts.
●
Avoid holding the brake pedal down too long or applying the brakes too
frequently. This could cause the brakes to overheat and result in reduced
braking efficiency.
310