Engine (Ignition) Switch (Vehicles With A Smart Entry & Start System) - Toyota Land Cruiser Prado Owner's Manual

2-1. Driving procedures
Engine (ignition) switch (vehicles with a smart entry & start system)
Performing the following operations when carrying the electronic
key on your person starts the engine or changes "ENGINE START
STOP" switch modes.
■
Starting the engine
Automatic transmission
Check that the parking brake is set.
STEP 1
Check that the shift lever is set in P.
STEP 2
Firmly depress the brake pedal.
STEP 3
The "ENGINE START STOP" switch indicator will turn green.
If the indicator does not turn green, the engine cannot be started.
STEP 4
Press the "ENGINE START
STOP" switch.
The engine will crank until it
starts or for up to 30 seconds,
whichever is less.
Continue depressing the brake
pedal until the engine is com-
pletely started.
Diesel engine only: the
indicator turns on. The engine
will start after the indicator light
goes out.
The engine can be started
from any "ENGINE START
STOP" switch mode.
2
179