Selecting Conventional Constant Speed Control Mode - Toyota Land Cruiser Prado Owner's Manual

2-4. Using other driving systems

Selecting conventional constant speed control mode

Constant speed control mode differs from vehicle-to-vehicle distance
control mode. When constant speed control mode is selected, your
vehicle will maintain a set speed regardless of whether or not there
are other vehicles in the lane ahead.
252
Press the "ON-OFF" button to
activate the cruise control.
Press the button again to deacti-
vate the cruise control.
Switch to constant speed con-
trol mode. (Push the lever for-
ward and
approximately 1 second.)
Dynamic radar cruise control indi-
cator will come on.
When in constant speed control
mode, to return to vehicle-to-vehi-
cle distance control mode, push
the lever forward again and hold
for approximately 1 second.
After the desired speed has been
set, it is not possible to return to
vehicle-to-vehicle distance con-
trol mode.
If the "ENGINE START STOP"
switch is turned off and then
turned to IGNITION ON mode
again, the vehicle will automati-
cally return to vehicle-to-vehicle
distance control mode.
Adjusting the speed setting:
→P. 247
Canceling and resuming
speed setting: →P. 249
hold for
the