Sorting Tool Management Lists - Siemens SINUMERIK 840D sl Operating Manual

Tool management

10.11 Sorting tool management lists

10.11 Sorting tool management lists
When you are working with many tools, with large magazines or several magazines, it is
useful to display the tools sorted according to different criteria. Then you will be able to find a
specific tool more easily in the lists.
Procedure
...
248
1. Select the "Parameter" operating area.
2. Press the "Tool list", "Tool wear" or "Magazine" softkey.
3. Press the ">>" and "Sort" softkeys.
The lists are displayed sorted numerically according to magazine loca-
tion.
Tool types are used to sort tools with the same magazine location. Iden-
tical types (e.g. milling cutters), in turn, are sorted according to their
radius value.
4. Press the "Acc. to type" softkey to display the tools arranged by tool
type. Identical types (e.g. milling cutters) are sorted according to their
radius value.
- OR -
Press the "Acc. to name" softkey to display the tool names in alphabeti-
cal order.
The replacement tool numbers are used to sort tools with the same
names.
- OR -
Press the "Acc. to T number" softkey to display the tool names sorted
numerically.
- OR -
Press the "Acc. to D number" softkey to display the tools sorted by D
number.
The list is sorted according to the specified criteria.
Operating Manual, 01/2015, 6FC5398-6AP40-5BA2
Universal