Cutting Edge Data - Siemens SINUMERIK 840D sl Operating Manual

10.9.2

Cutting edge data

The "Tool Details" window provides the following data on the selected tool when the "Cutting
edge data" softkey is active.
Parameter
Magazine location
Tool name
ST
D quantity
D
Tool type
Geometry
Wear
Geometry
Wear
Milling/turning machine
For type 500 (rougher) and type 510 (finisher)
Cutting edge graphic
Reference direction
Holder angle
Universal
Operating Manual, 01/2015, 6FC5398-6AP40-5BA2
5. Press the softkey "Cutting edge data" if you wish to display the cutting
edge data.
6. Press the softkey "Monitoring data" if you wish to display the monitoring
data.
7. Press the "Additional details" softkey.
The "Tool Details - All Parameters" window is opened.
All of the tool parameters are displayed in the list.
Meaning
The magazine number is specified first, followed by the location number in the maga-
zine.
If there is only one magazine, only the location number is displayed.
The tool is identified by the name and the sister tool number. You can enter the name
as text or number.
Sister tool number (for sister tool strategy)
Number of created cutting edges
Cutting edge number
Tool symbol with type number
Length
Tool length
Tool wear
Ø (diameter)
Tool diameter
Tool wear, diameter
The cutting edge graphic shows the positioning defined by
the holder angle, cut direction and cutting tip angle.
The reference direction for the holder angle specifies the cut
direction.
To determine the cutting edge positioning
Tool management
10.9 Tool details
243