Siemens SINUMERIK 840D sl Operating Manual page 263

Closing the program
Note
A program does not have to be closed in order for it to be executed.
Universal
Operating Manual, 01/2015, 6FC5398-6AP40-5BA2
Press the ">>" and "Exit" softkeys to close the program and editor again.
- OR -
If you are at the start of the first line of the program, press the <Cursor left>
key to close the program and the editor.
To reopen a program you have exited with "Close", press the "Program" key.
Managing programs
11.2 Opening and closing a program
263