Hitron HCB-J5FD Instruction Manual page 8

 Both : Privacy function and BLM function on.
 Off : Function off.
3) Edit : Mask area edit.
 Edit mode take effect during Func not Off.

Size : adjust the size of the Privacy and BLM mask area.

Posi : adjust the position of the Privacy and BLM mask area.

Tilt : adjust tilting of Privacy and BLM mask area.

Color: Select Privacy and BLM mask (0-14).

Transparency: Select Privacy mask transparency (Default 3/0-3).

Mosaic: Select Privacy and BLM mask mosaic On/Off

Adj. Mosaic: Adjust Privacy and BLM mask mosaic level (0-31).
<Detection>
 Func : Detection function selection.
 Sens Down : Adjust to Motion Sensitivity using left/right Buttons.
1) OFF : Detection function off.
2) Zone : Area motion detection mode.
 Zone : Select Motion detection zone (Zone1-4).
 Func : Select Motion detection on/off.
 Size : Press Enter button to adjust the size of the Motion detection area.
 Posi : Press Enter button to adjust the position of the Motion detection area.
 Link Zoom : Select Motion detection with D-PTZ function that On/Off .

When the motion triggered in the area, zoom and move to the area with
D-PTZ.
3) Motion Trace : Motion trace mode on.
 Tracks an object through a scene and generates an alarm.
4) Face Trace : Face Trace mode on.
 Tracks face through a scene and generates an alarm.
 Sens Down : lower value is more widen the scope to judge face. (0~127)
 Min Size : Minimum face size configuration (0 : minimum face size is to none)
The result of face trace can be inaccuracy.
5) Mine : Mine area mode.
 By this function, User can draw motion detection area with free dotting
 Set Mine : Press the Enter button to Set Mine mode.

< > : Move : Mine Zone move using the Left and Right buttons.

UP:Set : Mine Zone setting using the Up button.

DN:Clr : Mine Zone clear using the Down buttons.

ENT:End : Press the Enter button to set Mine mode end.
 Clr All : Press the Enter button to set Mine area clear.
 Display : Select Mine Display On/Off.
6) Absent : Press the Enter button to Absent detection mode.
 Absent : Detect object appeared or removed the scene.
 Sens Down : Adjust sensitivity of Absent check(0-255).
7