Table of Contents
Related Manuals for Hitron HCG-P7xDxA32
Summary of Contents for Hitron HCG-P7xDxA32
- Page 1 03-03-M14 50303712 M.J.KWON 50303712 M.J.KWON 15-04-22 Various Detection Methods 수정 rev.B-5p: Super High Resolution Day & Night Camera HCG(I)-P7xDxA32/NoBrand(Effio-A) 50303712 15-04-22 M.J.KWON 15-04-22 15-04-22 15-04-22...
- Page 2 Super High Resolution Day & Night Camera...
-
Page 3: Fcc Compliance Statement
FCC COMPLIANCE STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC INFORMATION : This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. -
Page 4: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. . Do not block any ventilat ion openings. Install in accord ance with the manufacturer`s instructions. 6. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. - Page 5 TABLE OF CONTENTS INTRODUCTION CONNECTION & CONTENTS BASE INSTALLATION MANU MAP SPECIFICATIONS DIMENSION...
- Page 6 The camera provides a high-quality image using SONY Wide Dynamic 1/3” Super-HADII 960H CCD and digital signal processing LSI chips. 1/3" Super-HADII 960H CCD Super high-resolution of 750TV lines Digital Wide Dynamic Range-ATR-EX2 Auto Electronic Shutter [1/50(60) ~ 1/100,000] and manual electronic shutter modes [1/50(60) ~ 1/10,000] 0.1 lux(Colour), 0.01 lux(B/W), 0.001 lux(Slow-Shutter) @ F1.4 Sensitivity Digital Noise Reduction- 2D,3D...
- Page 7 AC24V/DC12V AC24V/DC12V RS 485(+) RS 485 (-) DC 12V Type BLACK GRAY DN EXT-IN <Connector Option> 1. Lens : Allows a wide area to be monitored. 2. Color Lead Wire & Color Display Label 2-1. External Day/Night Control(Option) Select Day/Night mode using external equipment, by connecting control lines to the appropriate terminals.
- Page 8 1. Make mounting holes and cable hole in the place (ceiling or wall) to which this dome camera is installed using the Driling guide label. 2. To remove dome cover, turn the dome body counterclockwise until locators reach and of travel and pull off. Push the liner on the sides where the patterns are put in the teeth of a comb and pull it out.
- Page 9 MANU MAP SETUP MANU 1/ 2 SCENE SELECT SCENE SELECT PICTURE ADJUST EZOOM PICT ADJUST CUSTOM BRIGHTNESS EZOOM FULL AUTO CONTRAST INDOOR SHARPNESS TILT PRIVACY MASK OUTDOOR MOTION DET COLOR GAIN BACKLIGHT SYS SETTING EXIT RETURN RETURN ADVANCE MENU SHUTTER/AGC WHITE BAL HLC/BLC WDR/ATR-EX...
- Page 10 MANU MAP ADVANCE MENU LENS SHD COMP DEFOG FLK LESS ANTI CR RETURN LENS SHADE DEFOG SETUP FLK LESS ANTI CR COMP SETUP LEVEL AUTO AUTO PATTERN POSH POSV RETURN RETURN SETUP MANU SCENE SELECT PICT ADJUST EZOOM PRIVACY MASK MOTION DET SYS SETTING EXIT...
- Page 11 MANU MAP SETUP MANU LANGUAGE LANGUAGE MAINTENANCE VERSION MAINTENANCE ENGLISH W.PIX MASK EXIT ESPANOL CAMERA RESET PYCCKNN PORTUGUES DEUTSCH FRANCAIS 日本語 RETURN RETURN W.PIX MASK AUTO DATA CLEAR AUTO COMP MANUAL COMP MANUAL LEVEL1 REGISTRATION LEVEL2 REG.POINT AUTO CUSOR COLOR BLINK REG.NUMBER RETURN...
-
Page 12: Setup Menu
<SETUP MENU> 1. Scene Select function The six modes can be selected. CUSTOM /FULL AUTO / INDOOR / OUTDOOR / BACK LIGHT / ITS CUSTOM This mode turns off the auto scene recognition. All functions can be set and adjusted manually FULL AUTO This mode supports various shooting scenes. - Page 13 5. PRIVACY MASK The mask function hides one or more areas which the user does not want to be displayed on the screen. This SET is capable of outputting 15 masks to the display. Each of these 15 masks can be set with its own display area, color, darkness and mosaic processing.
- Page 14 7-2-2. ADJUST When performing the automatic mechanical iris adjustments, the convergence speed which is suitable for the lens installed is calculated, Shoot a high-brightness subject which will make the brightness of the whole screen uniform. -Check that the shooting conditions are sufficiently bright and stable. 7-2-3.
- Page 15 9. LANGUAGE LANGUAGE select between: English, Spanish, Russian, Portuguese, German, French, Japanese. 10. VERSION Camera version information. 11. MAINTENANCE W.PIX MASK White pixel compensation menu. The white pixel detection and compensation function can automatically detect and compensate up to 64 white pixels.(Static detection) AUTO This mode performs the optimal operation for detecting white pixels, and automatically detects the white pixels of CCD image sensors.
-
Page 16: Advanced Menu
<ADVANCED MENU> 12. SHUTTER / AGC AEME (Auto Exposure / Manual Exposure) selection, shutter / AGC This type of control adjusts the exposure amount using the shutter speed. 12-1. AUTO Exposure control is performed automatically. AE LEVEL (Auto Exposure Lebel) AE performs exposure control so that the OPD output level (evaluation value) is the target brightness level (AE reference level). - Page 17 MANUAL MWB allows WB control to be performed manually following the black body radiation curve. The configurable color temperature setting range is 1500K to 15000K. The setting can be performed in 64 steps. PUSH LOCK Holds the all pull-in frame The PUSH LOCK function first transfers to PUSH mode and performs pull-in operation, and then transfers to HOLD mode when pull-in is complete.
- Page 18 18. IR OPTIMIZER (OPTION) If, when the Night operation mode of the Day/Night function is established, the mode is used together with an external infrared LED light source, excessive front lighting may be generated, resulting in overexposure. 18-1. IR OPTIMIZER SETUP MODE(IR Model only) IR optimizer photometry mode selection IR AREA...
- Page 19 21. FLK LESS Flickerless function ON/OFF selection MODE GAIN CNTL Selects gain modulation ON. SHUTTER FIX Selects flickerless shutter fix ON. 22. ANTI CR (Anti color-rolling) Anti color-rolling mode is valid when the AEME parameter is set to AE. When the parameter is set to HOLD, the status of the previous field is maintained.
-
Page 20: Specifications
SPECIFICATIONS (Option) AC24V / DC12V - 180mA(2.2W) DC12V - 170mA(2.1W) 1/3" Super-HADII 960H CCD 1028(H)x508(V) 1028(H)x596(V) Effective pixels 976(H)x494(V) 976(H)x582(V) / Line Lock(Option) 750TVL 0.01 , 0.001Lux(Slow-shutter) Tact Switch, Coaxial COMM(32BIT),RS485(Pelco D)-Option Lens DC / MANUAL Scene Select CUSTOM / FULL AUTO / INDOOR / OUTDOOR / BACKLIGHT / ITS ATW/ PUSH/ USER1/ USER2/ MANUAL/ PUSH LOCK White Balance 6~44.8DB... - Page 21 0.88 lb (0.4kg) 1.41 lb (0.64kg) 50303712B...