Lens - Hitron HCB-J5FD Instruction Manual

Wdr super high resolution day & night color camera
Table of Contents

Advertisement

LENS

The lens is not supplied with this camera. Purchase a lens suitable for your
requirements. These cameras accept both C-and CS-mount type lens.
<Notes >
For using main functions it is recommended to use Auto Iris Lens with DC
type.
If the lens is marked with fingerprints other marks, the image quality might
be poor.
It is recommended to use a high quality lens to improve the image quality
under low illumination.
<INSTALLING AUTO IRIS LENS>
1.
Remove the cover from the iris lens plug supplied, and solder the lens cable to the
plug as shown below.
● Video type:
Pin 1 --- Red (Power source)
Pin 2 --- N.C
Pin 3 --- White (Video signal)
Pin 4 --- Black (GND)
Pin 3
Pin 1
2.
Remove the protective cap, and attach the lens to the camera by turning clockwise.
Rib
Connector
Cover
Heat
Pin 4
Shrinkable
Tubes
Pin 2
● DC type:
Pin 1 --- Damping-
Pin 2 --- Damping+
Pin 3 --- Drive+
Pin 4 --- Drive-
14
Automatic
Iris Lens
Iris Control
Cable
Connector

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hcb-k5fdHcb-k9fd

Table of Contents