Ford 1997 Aerostar Workshop Manual page 64

Gasoline engines

Hide thumbs Also See for 1997 Aerostar:

1997 Aerostar/Ranger

Section 10-01: Fuel Tank, Filters, Lines and

Electric Fuel Pump

REMOVAL AND INSTALLATION

Fuel Pressure Regulator

SPECIAL SERVICE TOOL(S) REQUIRED

Multiport Fuel Injection (MFI) Fuel Pressure Gauge (EFI/CFI Fuel Pressure Gauge) T80L-9974-B

Removal

1. Make sure assembly is depressurized by removing fuel tank filler cap (9030) and releasing pressure

from fuel system by opening the pressure relief valve on the fuel injection supply manifold assembly

in the upper right corner of the engine compartment. Use Multiport Fuel Injection (MFI) Fuel Pressure

Gauge (EFI/CFI Fuel Pressure Gauge) T80L-9974-B.

2. Remove vacuum line at fuel pressure regulator (9C968).

3. Remove two Allen retaining screws from regulator housing and discard.

4. Remove fuel pressure regulator O-rings. Discard O-rings.

5. If scraping is necessary, be careful not to damage fuel pressure regulator or fuel supply line O-ring

surfaces.

Installation

file://C:\TSO\tsocache\VDTOM_5368\SVK~us~en~file=SVKA1026.HTM~gen~ref.HTM

1997 Aerostar, Ranger, Equipped with 2.3L, 3.0L, and 4.0L

Description

tomsn048@gmail.com

Gasoline Engines Workshop Manual

Tool Number

Page 1 of 2

2011-04-29

1997 ranger