Ford 1997 Aerostar Workshop Manual page 54

1997 Aerostar/Ranger
Removal
1. Release safety clip from fitting.
2. Fit Quick Disconnect Tool T90T-9550-B (5/16-inch) or T90T-9550-C (3/8-inch) to fitting body so the
tool can enter the body and release the retaining fingers.
3. Push the tool into the fitting body to release the retaining fingers from the formed male tube end.
4. Pull the female fitting and the male tube end apart.
5. Remove the tool from the disconnected fitting.
6. Inspect the fitting for any internal parts that may have been damaged. Fuel tube should be replaced if
internal parts are damaged.
Installation
1. Align the fitting and tube axially.
2. Push the tube into the fitting. When properly engaged, a click will be heard.
file://C:\TSO\tsocache\VDTOM_5368\SVK~us~en~file=SVKA1023.HTM~gen~ref.HTM
tomsn048@gmail.com
Page 4 of 6
2011-04-29