Table of Contents
Advertisement
FlipTop Touch Screen
Uploading and Upgrading
USB
30 • FlipTop Touch Screen: FT-TS600
Crestron recommends using the latest programming software and that each device
contains the latest firmware to take advantage of the most recently released features.
However, before attempting to upload or upgrade it is necessary to establish
communication. Once communication has been established, files (for example,
programs, projects, or firmware) can be transferred to the control system (or device).
Finally, program checks can be performed (such as changing the device ID or
creating an IP table) to ensure proper functioning.
NOTE: Crestron software and any files on the website are for authorized Crestron
dealers and Crestron Service Providers (CSPs) only. New users must register to
obtain access to certain areas of the site (including the FTP site).
Establishing Communication
Use Crestron Toolbox for communicating with the FT-TS600; refer to the Crestron
Toolbox help file for details. There are two methods of communication: USB, and
TCP/IP.
NOTE: Required for loading projects and firmware.
USB Communication
PC Running
Crestron Toolbox
The COMPUTER port on the FT-TS600 connects to the USB port on the PC via the
included Type A to Type B USB cable:
1.
Click Tools | System Info.
2.
Click the
icon.
3.
For Connection Type, select USB. When multiple USB devices are
connected, identify the FT-TS600 by entering "FT-TS600" in the Model
text box, the unit's serial number in the Serial text box or the unit's
hostname (if known) in the Hostname text box.
Click OK. Communications are confirmed when the device information is
4.
displayed.
Crestron FT-TS600
USB
Operations & Installation Guide – DOC. 7585B
FT-TS600
Advertisement
Table of Contents
