Ipv6 Status - TP-Link TL-WR841HP Quick Installation Manual

Chapter 4
4. 15. IPv6
This function allows you to enable IPv6 function and set up the parameters of the
router's Wide Area Network (WAN) and Local Area Network (LAN).

4. 15. 1. IPv6 Status

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to IPv6 > IPv6
the router.
• WAN - This section shows the current IPv6 information of the router's WAN port,
including Connection
IPv6 DNS and Secondary IPv6
• LAN - This section shows the current IPv6 information of the router's LAN port,
including IPv6 Address Assign
4. 15. 2. IPv6 WAN
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to IPv6 > IPv6
Status, and you can view the current IPv6 status information of
Type, IPv6 Address
DNS.
Type, IPv6 Address
WAN.
Configure the Router as a Standard Wireless Router
information, IPv6 Default
and Link-local
Gateway, Primary
Address.
60