Password - TP-Link TL-WR841HP Quick Installation Manual

Chapter 6
Some settings of the router will take effect only after rebooting, including:
• Change the LAN IP Address (system will reboot automatically).
• Change the DHCP Settings.
• Change the Working Modes.
• Change the Web Management Port.
• Upgrade the firmware of the router (system will reboot automatically).
• Restore the router to its factory defaults (system will reboot automatically).
• Update the configuration with the file (system will reboot automatically).
6. 6. 8.

Password

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to System Tools
and password of the router.
Note: The new username and password must not exceed 15 characters and not include any spacing.
3. Click Save.
6. 6. 9. Language
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to System Tools
3. Select the language you prefer from the pull-down list, and then click Save.
> Password, and you can change the factory default username
> Language.
Configure the Router as a Repeater
111