TP-Link TL-WR841HP Quick Installation Manual page 16

Chapter 2
Step 1: Configure
Tips: Using WPS Button is an easy way to extend your host network. We recommend you to use this way if your host
router has the WPS button. The button might look like these:
• Option One: Using RE Button
1 ) Press the WPS button on the host router.
2 ) Press and hold the
seconds within 1 minute. The router will start to reboot.
3 ) Once rebooted, the
indicating a successful connection.
• Option Two: Using Web Browser
1 ) Connect a computer to the router via an Ethernet cable or wirelessly by using
the SSID (Network Name) and password printed on the label at the bottom of
the router.
2 ) Enter http://tplinkwifi.net
language you want to use and then use
Then click Log
(RE button) on the top panel of the router for about 3
RE LED should change from blinking to a solid state,
in the address bar of a web browser. Select the
In.
Connect to the Internet
.
WPS
admin for both username and password.
11