TP-Link TL-WR841HP Quick Installation Manual page 124

3. Survey the SSID to be bridged:
1 ) Go to Wireless
2 ) Click Survey, locate the host router's SSID and click Choose.
3 ) If the host router is set with a wireless password, you should enter its wireless
password.
4 ) Click Save.
4. Disable DHCP: Go to DHCP, select Disable, and click Save.
Now you can go to
means WDS bridging is successfully built.
Q5. What should I do if I cannot access the internet after the
configuration in router mode?
1. Visit http://tplinkwifi.net, and log in to with the username and password you set for
the router.
2. Go to Status to check WAN status:
> Wireless Settings
Status to check the WDS status. When the
and click Enable WDS Bridging.
WDS status is Run, it
119