Wireless Mac Filtering - TP-Link TL-WR841HP Quick Installation Manual

Chapter 6
• Extended SSID - Either use the
router/AP's SSID or enter a new one (up to 32 characters long). This field is case-
sensitive.
• Copy Host SSID - Click to copy the SSID of the host router/AP. When selected, the
extended network will share the SSID of your host network.
• Extended Security
network.
• No Security
• WPA-PSK/WPA2-PSK
WPA (Wi-Fi Protected Access) standard, such as WPA and WPA2.
• WEP - This option is the most basic form of wireless security that can be used
if your client devices can only access wireless using WEP (Wired Equivalent
Privacy).
6. 4. 3.

Wireless MAC Filtering

Wireless MAC Filtering is used to deny or allow specific wireless client devices to access
your network by their MAC addresses.
I want to:
How
can I do
that?
Copy Host SSID
- Select one of the security options to set local extended wireless
- This option disables the wireless security.
- This option supports multiple implementation of the
Deny or allow specific wireless client devices to access my
network by their MAC addresses.
For example, you want the wireless client A with the MAC
address 00-0A-EB-B0-00-0B and the wireless client B with the
MAC address 00-0A-EB-00-07-5F to access the router, but
other wireless clients cannot access the router
1. Visit http://tplinkwifi.net, and log in with the username and
password you set for the router.
2. Go to Wireless
3. Click Enable to enable the Wireless MAC Filtering function.
4. Select Allow the stations specified by any enabled entries in
the list to access
Configure the Router as a Repeater
button to automatically copy the main
> Wireless MAC Filtering.
as the filtering rule.
101