Iptv - TP-Link TL-WR841HP Quick Installation Manual

Chapter 4
• Subnet Mask - An address code that determines the size of the network. Normally
255.255.255.0 is used as the subnet mask.
Note:
• If you have changed the IP address, you must use the new IP address to log in.
• If the new IP address you set is not in the same subnet as the old one, the IP address pool in the DHCP
Server will be configured automatically, but the Virtual Server and DMZ Host will not take effect until they
are re-configured.
4. 3. 3.

IPTV

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Network > IPTV.
• IGMP Snooping - IGMP snooping is designed to prevent hosts on a local network from
receiving traffic for a multicast group they have not explicitly joined. IGMP snooping
is especially useful for bandwidth-intensive IP multicast applications such as IPTV.
• IGMP Proxy - Select to enable IGMP Proxy.
• IGMP Version - Select the IGMP(Internet Group Management Protocol) Proxy Version,
either V2 or V3, according to your ISP.
• IPTV - Select to enable the IPTV feature.
• Mode - Select the appropriate mode according to your ISP.
• LAN 1/2/3/4 - Assign your LAN port to whether function as the Internet supplier or as
the IPTV supplier.
4. 3. 4. MAC Clone
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
Configure the Router as a Standard Wireless Router
27