Ipv6; Ipv6 Status; Ipv6 Wan - TP-Link Archer C20 User Manual

Chapter 4

4. 15. IPv6

This function allows you to enable IPv6 function and set up the parameters of the
router's Wide Area Network (WAN) and Local Area Network (LAN).

4. 15. 1. IPv6 Status

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
the router.
• WAN -
including
IPv6 DNS
• LAN -
including

4. 15. 2. IPv6 WAN

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
Downloaded from ManualsNet.com
IPv6 > IPv6 Status, and you can view the current IPv6 status information of
This section shows the current IPv6 information of the router's WAN port,
Connection Type, IPv6 Address
and Secondary IPv6
This section shows the current IPv6 information of the router's LAN port,
IPv6 Address Assign
IPv6 > IPv6 WAN.
search engine
information,
DNS.
Type, IPv6 Address and
Configure the Router
IPv6 Default Gateway, Primary
Link-local Address.
55