Wiring
The single relay option card can be driven by relay 2, or by either of
the two analog outputs.
To Drive from Relay 2:
Wire as shown below. Install a jumper between terminals 5 and 12.
Program relay using parameter 326.
Output Relay 2
TR1 VFD
VLT 5000
Tighten terminals on drive terminal strip to 5 in-lbs (0.6 N-m).
Tighten terminals on option card to 3.5 in-lbs (0.4 N-m).
®
Internal
Relay
Contacts
9