Delta RetroSign GRX-1 User Manual page 25

•
Change the design of the template by defining these elements:
- Should it be a single or multiple measurements?
Note: if 'Single Shot' is activated some of the below options are disabled.
- Should the pass/fail check be activated? If yes, remember to insert the desired
performance values for background, legend, and contrast. Type '0' or leave the field blank
if a performance check for one of these is not needed.
- How many measurements (of background and legend) should been taken? Use the
swipe up / down functionality to select the relevant number (0-10).
Should a photo be included in the measurement? Press 'Take Picture'? (Optional
-
feature).
Which data fields should be linked to the template? Press 'Add new field' and select the
-
type of field you want to add from the drop-down menu (press the arrow on the screen for
the list to unfold – see screen shot below). Customized fields can be added by selecting
'Add new field' from the list and then typing in the name of your own data field. Finish
adding fields by pressing 'Add':
Any changes made to the template are automatically stored. Once you have completed editing the
template, press to return the template list.
3) Add a new template
•
Add a new template by pressing
screen:
RetroSign GRX User Manual / December 2017
at the top of the screen. This is then displayed on the
25
DELTA