Exchangeable Parts - Hohner UNIVERSAL 43/6 S Operating Instructions Manual

3.9 Exchangeable parts

- Fig. 20, Fig. 20a, Fig. 21 -
To change over from standard stitching to loop stitching, a set of exchangeable parts,
art. no. 9964 401 is required, consisting of:
Bender –L6-, cpl. Art. no. 9964 440
Former –L6-, cpl. Art. no. 9964 435
Leaf spring -L- Art. Nr. 3964 427
Or a set of exchangeable parts loop stitch L8,
Art.-no. 9964 680, consisting of:
Bender –L8-, cpl. Art.-no. 9964 678
Former –L8-, cpl. Art. no. 9964 675
Leaf spring -L- Art. no. 3964 427
3.10 Procedure
- Remove stitching head.
- Install additional leaf spring -L-
locking hexagon head screw
- Remove former (cf. 4.2.1 Replacing the former).
- Remove bender (cf. 0).
- Remount bender and former for loop stitching in the inverse order.
- Install and set stitching head.
3.11 Adapting the stitch and leg length settings
As the loop stitch requires a longer wire piece, a new setting is required for the stitch and leg
length (cf. 3.6).
Hohner Maschinenbau GmbH
. When installing the leaf spring -L-
only so strong, that you can still turn the leaf springs.
HK 43/6 S
Changeover (stitch type)
, please tighten the self-
39