General Overview - Hohner UNIVERSAL 43/6 S Operating Instructions Manual

2.1 General overview

- Fig. 1 -
2.2 Conformity
The Stitching Head 43/6 S conforms to the following guidelines and standards:
- Machine Guideline (98/37/EEC)
- EN 1010-1:1998 (final draft version) and
EN 1010-4:1997 "Machine safety – safety requirements in connection with the design and
manufacture of printing and paper processing machines", "Part 1: General requirements" and
"Part 4: Bookbinding, paper processing and paper finishing machines".
- This Operating Manual takes account of DIN EN 292, machine safety, basic terminology, general
principles of design.
2.3 Marking and type plate
The type plate is located at the front of the stitching head.
2.4 Technical data
Net weight of the stitching head
Quality of the stitching wire
Hohner Maschinenbau GmbH
Description of the Stitching Head
1,5 kg / 3.31 lbs
Only use perfect quality classes, in normal or
steel strength as required. Pay attention to
abrasion resistance, as heavy abrasion will clog
the wire-guidance parts.
HK 43/6 S
11