Required Tools And Equipment - Cisco ASR-1000-SIP10 Hardware Installation Manual

Preparing to Install a SIP or a Shared Port
Adapter
This chapter describes the general equipment, safety, and site preparation requirements for installing
SIPs and SPAs. This chapter contains the following sections:
•
•
•

Required Tools and Equipment

You need the following tools and parts to install SIPs and SPAs. If you need additional equipment,
contact a service representative for ordering information.
•
•
•
•
•
•
•
•
Safety Guidelines
This section provides safety guidelines that you should follow when working with any equipment that
connects to electrical power or telephone wiring.
OL-14126-03
Required Tools and Equipment, page 4-1
Safety Guidelines, page 4-1
Laser/LED Safety, page 4-9
Shared port adapter interface processor (SIP)
Shared port adapter (SPA)
Number 1 Phillips screwdriver
Number 2 Phillips screwdriver
3/16-inch flat-blade screwdriver
Your own electrostatic discharge (ESD)-prevention equipment or the disposable grounding wrist
strap supplied with the SIP or SPA
Antistatic mat
Antistatic container
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
4
C H A P T E R
4-1