Related Documentation - Cisco ASR-1000-SIP10 Hardware Installation Manual

Organization
This document contains the following chapters:
Section
Chapter
Chapter
Chapter
Chapter
Chapter
Chapter
Chapter

Related Documentation

The documentation listed below is available online and on the Documentation DVD.
Your router, switch, or gateway and the Cisco IOS software running on it contain extensive features,
which are documented in the following resources:
•
•
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
viii
Title
1 SIP and SPA Product Overview
2 Overview: Cisco ASR 1000 Series
Aggregation Services Routers SIPs
3 Overview: Cisco ASR 1000 Series
Aggregation Services Routers
Shared Port Adapters
4 Preparing to Install a SIP or a Shared
Port Adapter
5 Installing and Removing a SIP
6 Installing and Removing a Shared
Port Adapter
7 Troubleshooting the Installation
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide
Cisco IOS software:
For Cisco IOS configuration information and support, refer to the configuration guide or
–
command reference for a Cisco IOS mainline release. You can also refer to the specific Cisco
IOS software document for a particular feature.
To see if a feature is supported by a Cisco IOS release, to locate the software document for that
–
feature, or to check the minimum software requirements of Cisco IOS software with the
hardware installed on your router, Cisco maintains the Software Advisor tool on Cisco.com.
You must be a registered user on Cisco.com to access this tool. To access Software Advisor,
click Login at Cisco.com, type "Software Advisor" in the SEARCH box, and click GO. Click
the link for the Software Advisor tool.
Description
Provides an introduction to SPA interface
processors (SIPs) and shared port adapters
(SPAs).
Provides a SIP and SPA compatibility summary.
For each supported SIP, provides a summary of
SIP characteristics and a SIP overview.
For each supported SPA, provides a summary of
SPA characteristics and a SPA overview.
Describes the required tools, equipment, and
safety guidelines for installing SIPs and SPAs.
Describes the procedures for installing and
removing a SIP on Cisco ASR 1000 Series
Aggregation Services Routers.
Describes the procedures for installing and
removing a SPA on Cisco ASR 1000 Series
Aggregation Services Routers. It also describes
how to verify the SIP and SPA installation.
Provides information for troubleshooting the
installation of SIPs and SPAs. It also provides
packing information to ship a SIP or SPA.
Preface
OL-14126-03