Entering Setup; Selecting Menus; Exiting Setup - Printek Mobile Thermal Printer MtP300 Series Operator's Manual

Printer Configuration

Entering Setup

To enter Setup, press and hold the
Continue to hold the Enter Button until "Menus Active" appears on the LCD Display. After releasing the
Enter Button, "Entering Setup Menus" will be displayed momentarily before advancing to the "FORMAT
MENU". While in Setup Mode, the power indicator will blink slowly.

Selecting Menus

Once Setup Mode has been successfully entered, the "FORMAT MENU" is the first menu displayed. Note that
while in Setup Mode, the Paper Feed Button now operates as an
INTERFACE MENU or OPTIONS MENU, or to Exit Setup, press the
menu is displayed. With a few exceptions which are described where appropriate, pressing the
Button will always advance you to the next menu.
Detailed explanations on how to navigate each of the menus and use their features follow.

Exiting Setup

Setup may be exited by pressing the
LCD Display, and "Save Changes" is displayed on the bottom line. To save any changes you have made
and exit Setup press the
Changes" will be displayed. If no values where changed, "Exiting Menus No Changes" will be
displayed.
If you do not want to save the changes you have made, press the
Changes" on the bottom line and then press the
displayed.
After Setup is exited and any changes saved, the printer will reset and reinitialize itself to adopt any changes
that may have been made. Note that when this reset occurs, any data that may have been in the input buffer will
be discarded.
16
Enter Button while turning on the printer with the
Advance Button until "Exit Setup" is displayed on the top line of the
Enter Button. If feature values were changed, "Exiting Menus Saving
Enter Button. "Exiting Setup No Changes" will be
Power Button.
Advance Button. To advance to the
Advance Button until the desired
Increment Button to display "Discard
Advance