Printek Mobile Thermal Printer MtP300 Series Operator's Manual page 32

Printer Configuration
Discoverability
Possible Values: Off, On*
This feature is used to set whether the printer may be discovered by other Bluetooth devices.
PIN
Possible Values: 0*, Up to 16 Numeric Characters.
Note that this feature is only available if Paring Mode is set to Paired.
To advance through the character positions, press the
position, press the Increment Button. The characters that may be selected are "0123456789" and SPACE.
Setting a character to SPACE will terminate the value being set.
Security
Possible Values: Off*, On
Setting Security to On forces the printer and the remote device to use pairing. Setting Security On requires that
Pairing is set to Paired and that a PIN has been entered that matches the PIN in the remote device.
Local Name
Possible Values: MtP300-aaannnnn*,
Up to 16 characters of "0" through "9", "A" through "Z", "a" through "z", "-", "_", SPACE
This feature sets the name that will be displayed by most host systems when "discovering" the printer. When
shipped from the factory, the default value for the Bluetooth Local Name is "MtP300-aaannnnn" where
"aaannnnn" is the printer's serial number. This name may be changed to any combination of letters, numbers,
dashes, underscores, and SPACEs. The name may be up to 16 characters in length.
To advance through the character positions of the name, press the
at the current position, press the
"0123456789 ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz - _ SPACE".
26
Discoverability
On
PIN
0
Advance Button. To change the character at the current
Security
Off
Local Name
MtP300-AAANNNNN
Increment Button. The order of characters that may be selected is
Advance Button. To change the character