Show Tech-Support Routing Ospf - Cisco XR 12000 Command Reference Manual

show tech-support routing ospf

show tech-support routing ospf
To automatically run show commands that display information specific to Open Shortest Path First (OSPF)
debugging, use the show tech-support routing ospf command in EXEC mode.
show tech-support routing ospf [ process-id ] [no-trace] [active| standby] {terminal [page]| file send-to
[background] [compressed| uncompressed]}
Syntax Description
process-id
no-trace
active
standby
terminal
page
file
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
268
(Optional) Name of the OSPF process.
(Optional) Excludes trace information from the command output.
(Optional) Displays information from active route processor only.
(Optional) Displays information from standby route processor only.
Displays the command output on the terminal.
(Optional) Displays the command output on a single page at a time. Use the
Return key to display the next line of output or use the space bar to display the
next page of information. If not used, the output scrolls (that is, it does not stop
for page breaks).
Press the Ctrl-C keys to stop the command output.
Specifies that the command output is saved to a specified file.
Tech-Support Commands
OL-28456-02