Cisco XR 12000 Command Reference Manual page 85

Troubleshooting Commands
Command Default
No default behavior or values
Command Modes
EXEC
Command History
Release
Release 3.2
Usage Guidelines
Use the show tbm hardwarecommand to display hardware-related ingress and egress information for the
tree bitmap.
Task ID
Task ID
cisco-support
Examples The following example shows the output of the show tbm hardware command:
RP/0/0/CPU0:router# show tbm hardware ipv4 unicast dual detail location 0/6/cpu0
TBM Table Type: IPv4 Unicast
------------------------------
TBM: number of pulses: 71
TBM: number of Err fix attempts: 0
Past failures: leaf(0), mem(0), mipc(0), flush_mipc(0)
PLU Bucket Statistics:
-----------------------------
Ingress PLU Info
----------------
OL-28456-02
No current failures
post_compact(0), pre_compact(0)
Bucket 0: 44
Bucket 1: 44
Bucket 2: 327
Bucket 3: 44
Bucket 4: 44
Bucket 5: 43
Bucket 6: 43
Bucket 7: 45
PLU: Num Writes : 3064
PLU: Num Copies : 2197
PLU Memory Channel Statistics:
-----------------------------
Number of compactions: 0
FCRAM0 Chan: 110 (Pages: 5, 1% used)
FCRAM1 Chan: 125 (Pages: 8, 0% used)
FCRAM2 Chan: 127 (Pages: 8, 0% used)
FCRAM3 Chan: 148 (Pages: 8, 0% used)
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
Modification
This command was introduced.
Operations
read
show tbm hardware
77