Overview - Xilinx KC724 IBERT Getting Started Manual

KC724 IBERT Getting Started Guide

Overview

This document provides a procedure for setting up the KC724 Kintex™-7 FPGA
GTX Transceiver Characterization Board to run the Integrated Bit Error Ratio Test (IBERT)
demonstration using the ISE Design Suite. The designs that are required to run the IBERT
demonstration are stored in a Secure Digital (SD) memory card that is provided with the
KC724 board. The demonstration shows the capabilities of the Kintex-7 XC7K325T FPGA
GTX transceiver.
The KC724 board is described in detail in UG932, KC724 Kintex-7 FPGA GTX Transceiver
Characterization Board User Guide.
The IBERT demonstrations operate one GTX Quad at a time. The procedure consists of:
1.
2.
3.
4.
5.
6.
7.
KC724 IBERT Getting Started Guide
UG930 (v1.0) October 23, 2012
Setting Up the KC724 Board.
Extracting the Project Files.
Connecting the GTX Transceivers and Reference
Configuring the FPGA.
Setting Up the ChipScope Pro
Viewing GTX Transceiver
Closing the IBERT Demonstration.
www.xilinx.com
Clocks.
Software.
Operation.
Overview
Chapter 1
5