Power Supply - Nvidia Tesla S2050 Installation Manual

36
08
IMPORTANT SAfETY INfORMATION
> You must use a power cord rated for your product and for the
voltage and current marked on the electrical ratings label of
the product. The voltage and current rating of the cord must
be greater than the voltage and current rating marked on the
product.
> Make sure that the total amperage rating of all products plugged
into an extension cord or power strip does not exceed 80 percent
of the ampere ratings limit for the extension cord or power strip.
> The product is equipped wit a three-wire electrical grounding
type plug that has a third pin for ground. This plug only fits into a
grounded electrical power outlet.
> Plug the power cord into a grounded (earthed) electrical outlet
that is easily accessible at all times.
> do not disable the power cord grounding plug. The grounding plug
is an important safety feature.
> do not place objects on AC power cords or cables. Arrange them
so that no one may accidentally step on or trip over them.
> do not pull on a cord or cable. When unplugging from the
electrical outlet grasp the cord by the plug.
> When possible, use one hand only to connect or disconnect cables.
> do not modify power cables or plugs. Consult a licensed
electrician or your power company for site modifications.
for finland: Laite on liitettävä suojamaadoituskoskettimilla
z
varustettuun pistorasiaan
for Norway: Apparatet må tilkoples jordet stikkontakt
z
for Sweden: Apparaten skall anslutas till jordat uttag
z

Power Supply

> Ensure that the voltage and frequency of your power source
match the voltage and frequency inscribed on the equipment's
electrical rating label. If you have the question about the type of
power source to use, contact your authorized service.
> Connect to a properly wired and grounded electrical outlet.
Always follow your local/national wiring rules.