Nvidia Tesla S2050 Installation Manual page 40

IMPORTANT SAfETY INfORMATION
> The system should be installed in a controlled access location
where only qualified personnel have access to the system.
> Upon completion of any services or repairs to the product, have
your authorized service provider perform any safety checks
required by the repair procedure or by local codes to determine
that the product is in proper operating condition.
> Power down the equipment and disconnect all AC power cords
and cable before removing any access covers.
> do not replace components while power is applied to the product.
> first, shut down the product and disconnect all AC power cords.
> Allow the product to cool before removing covers and touching
internal components.
> Move products with casters carefully. Avoid quick stops and
uneven surfaces.
> do not block the opening used for ventilation, since these ensure
reliable operation of product and protect it from overheating. And
opening should be kept free of dust and debris.
> Allow sufficient air circulation around and prevent direct exposure
to radiant heat sources.
> before cleaning, unplug the product from the power source.
Use a damp cloth for cleaning. do not use liquid cleaners or
aerosol cleaners.
Precautions for Power Connection
Power Cords
To reduce the risk of electric shock or damage to the equipment:
> Use power cables provided with this product.
> If you have to change the power cords for any reason, use an
approved power cord.
> Not all power cords have the same current ratings. If you have
questions about the type of power cord to use, contact an
authorized service provider.
35