Table of Contents
Advertisement
38
08
IMPORTANT SAfETY INfORMATION
>
The product is properly mated with the rails. Products that are
improperly mated with the rails may be unstable.
>
No objects are placed on top of a rack-mounted device.
>
Installation of the equipment in a rack should be such that the
amount of airflow required for safe operation of the equipment is
not compromised.
>
Reliable earthing (grounding) of rack-mounted equipment should
be maintained. Particular attention should be given to supply
connections other than direct connections to the branch circuit
(for example, use of a power strip).
Manual Material Handling
To reduce the risk of personal injury or damage to the equipment:
>
Observe local occupational health and safety requirements and
guidelines for manual materials handling.
>
Obtain adequate assistance to lift and stabilize the product during
installation or removal. do not move large racks by yourself.
>
Remove all pluggable power supplies and modules to reduce the
weight of the product.
>
Use caution when pressing the component rail release latches
and sliding a component into the rack. The slide rails could pinch
your fingers.
>
do not extend the components from the rack too quickly as the
moving weight may damage the supporting rails.
Mounting of the equipment in the rack should be such that a
hazardous condition is not achieved due to uneven mechanical loading.
Hide quick links:
Advertisement
Table of Contents
