Desktop Installation - Planet FSD-1008HP User Manual

3.1 Desktop Installation

To install the FSD-1008HP on desktop, simply follow the following steps:
Step 1: Attach the rubber feet to the recessed areas on the bottom of the FSD-
1008HP, as shown in Figure 3-1.
Figure 3-1: Attaching the Rubber Feet to the FSD-1008HP
Step 2: Place the FSD-1008HP on desktop near an AC power source.
Step 3: Keep enough ventilation space between the FSD-1008HP and the
surrounding objects.
When choosing a location, please keep in mind the environmental
restrictions discussed in Chapter 1, Section 4, under Specifications.
Note
Step 4: Connect your FSD-1008HP to 802.3af/802.3at complied power devices
(PD) and other network devices
A. Connect one end of a standard network cable to the 10/100BASE-TX RJ45
ports on the front panel of the FSD-1008HP.
B. Connect the other end of the cable to the network devices such as printer
servers, workstations, routers, etc.
Connection to the Switch requires UTP Category 5, 5e, 6 network
cabling with RJ45 tips.
Note
13