Step 5: After the brackets are attached to the FSD-1008HP, use suitable screws to
securely attach the brackets to the rack, as shown in Figure 3-3.
Figure 3-3: Mounting the FSD-1008HP in a Rack
Step 6: Proceed with Steps 4 and 5 of session 3.1 Desktop Installation to connect
the network cabling and supply power to your Switch.
3.3 Wall Mounting Installation
Step 1: Please find the wall that can mount the FSD-1008HP.
Step 2: Install two screws on the wall.
Step 3: Hang the FSD-1008HP on the screws from the wall.
Step 4: Repeat step 5 of Desktop Installation for power supply to the FSD-
1008HP.
Before mounting the device to the wall, please check the location
of the electrical outlet and the length of the Ethernet cable.
Note
15