Table 9-20 Rac-Piu-Lte Board Indicator Descriptions - Zte ZXR10 1800-2S Hardware Description

ZXR10 ZSR V2 Hardware Description
Interface Attribute
The RAC-PIU-LTE board transfers data through the radio signals on the Sub-Miniature-A
(SMA) interface (whip omnidirectional antenna).
interfaces.
Note:
The SMA is a common model of antenna interfaces.
Indicators
For a description of the indicators on the panel of the RAC-PIU-LTE board, refer to
9-20.

Table 9-20 RAC-PIU-LTE Board Indicator Descriptions

Indicator
RUN
ALM
WWAN
RSSI
3G
LTE
Technical Specifications
For a description of the technical specifications of the RAC-PIU-LTE board, refer to
9-21.
SJ-20150204153047-004|2015-03-30 (R1.0)
Color Description
Green Operational status indicator. It is on when the board is
operating properly.
Red Alarm indicator. It is on if the board has an alarm.
Green Radio network access indicator. It flashes when the board
tries to access a radio network. It is on when the board
accesses the radio network successfully. It is off if the board
fails to access the radio network.
Green Signal strength indicator.
l
l
l
Green 3G signal indicator. It is on after the board accesses a 3G
network.
Green LTE signal indicator. It is on after the board accesses an
LTE network.
9-12
The panel has no other external
RSSI ≤ -100 dbm: There is no signal. The indicator is
off.
-99 dbm ≤ RSSI ≤ -90 dbm: The signal is weak. The
indicator flashes.
RSSI ≥ -89 dbm: The signal is strong. The indicator
is on.
ZTE Proprietary and Confidential
Table
Table