ZXR10 ZSR V2 Hardware Description
l
Provides two unchannelized E1 (75 ohm) interfaces.
l
Restores the line clock and providing it to an MPFU board for reference.
l
Supports the processing of various services, such as
l
Supports hot swapping.
l
Supports board information query and temperature monitoring.
Panel
For the panel of the RAC-SPIU-02UE1-75 board, see
Figure 9-2 Front Panel of the RAC-SPIU-02UE1-75 Board
Interface Property
The RAC-SPIU-02UE1-75 board provides micro coaxial interfaces, and it only supports
75 ohm non-balanced E1 interfaces. For a description of the interface properties, refer to
Table
9-5.
Table 9-5 Interface Properties of the RAC-SPIU-02UE1-75 Board
Property
Connector type
Operational mode
Applied standard
Supported link protocol
Supported network
protocol
Indicators
For a description of the indicators of the RAC-SPIU-02UE1-75 board, refer to
Table 9-6 Description of the Indicators on the Panel of the RAC-SPIU-02UE1-75 Board
Indicator
RUN
LNK1/LNK2
Technical Parameters
For the technical parameters of the RAC-SPIU-02UE1-75 board, refer to
SJ-20150204153047-004|2015-03-30 (R1.0)
Description
Micro coaxial
Full duplex
ITU-T
G.703, G.704
PPP, ML-PPP, HDLC,
IP
Color
Description
Green
The indicator is lit when the board is operating properly.
The indicator is lit when the link is operating properly, and is
Green
not lit when the link is idle.
9-4
PPP
and ML-PPP.
Figure
9-2.
FR
ZTE Proprietary and Confidential
Table
9-6.
Table
9-7.