ZXR10 ZSR V2 Hardware Description
Table 9-83 Optical Interface Properties of the RAC-DPIU-16GE-12SFP4E Board
Property
Connector type
Operational mode
Applied standard
Supported frame format
Supported network
protocol
Indicators
For a description of the indicators of the RAC-DPIU-16GE-12SFP4E board, refer to
9-84.
Table 9-84 Description of the Indicators on the Panel of the RAC-DPIU-16GE-12SFP4E
Board
Indicator
RUN
ALM
Electrical port
indicator
LNK/ACT
Technical Parameters
For the technical parameters of the RAC-DPIU-16GE-12SFP4E board, refer to
Table 9-85 Technical Parameters of the RAC-DPIU-16GE-12SFP4E Board
Parameter
Silk screen name
Dimensions (W × H × D)
Power consumption
Weight
SJ-20150204153047-004|2015-03-30 (R1.0)
Description
LC-type SFP optical module interface
Full duplex
IEEE
802.3z Gigabit Ethernet standard
Ethernet frame
IP
Color
Description
Green
The indicator is lit when the board is operating properly.
Red
The indicator is lit if the board produces an alarm.
Green/Yellow
Link status/data transmission indicators for four GE electrical
interfaces:
l
If the link is normal, the right green indicator is lit.
l
If data is being transmitted, the left yellow indicator flashes.
l
If there is no data being transmitted or no connection, the
indicators are not lit.
Link status/data transmission indicators for 12 GE optical
interfaces:
l
If the link is normal, the indicator is lit in green.
Green/Yellow
l
If data is being transmitted, the indicator flashes in yellow.
l
If there is no data being transmitted or no connection, the
indicator is not lit.
Specification
RAC-DPIU-16GE-12SFP4E
7.76 in. × 1.58 in. × 6.9 in. (197.2 mm ×40.24 mm ×175 mm)
36 W
0.6 kg
9-44
ZTE Proprietary and Confidential
Table
Table
9-85.