Rac-Piu-04Ge-Sfp; Figure 9-22 Front Panel Of The Rac-Piu-04Ge-Sfp Board; Table 9-64 Interface Properties Of The Rac-Piu-04Ge-Sfp Board; Table 9-65 Description Of The Indicators On The Panel Of The Rac-Piu-04Ge-Sfp Board - Zte ZXR10 1800-2S Hardware Description

ZXR10 ZSR V2 Hardware Description

9.22 RAC-PIU-04GE-SFP

Overview
RAC-PIU-04GE-SFP board provides the following functions:
l
Provides four GE optical interfaces which support 1000BASE-X.
l
Supports hot swapping.
l
Supports board information query and temperature monitoring.
Panel
For the panel of the RAC-PIU-04GE-SFP board, see

Figure 9-22 Front Panel of the RAC-PIU-04GE-SFP Board

Interface Properties
The RAC-PIU-04GE-SFP board uses SFP optical modules. For a description of the
interface properties, refer to

Table 9-64 Interface Properties of the RAC-PIU-04GE-SFP Board

Property
Connector type
Operational mode
Applied standard
Supported link protocol
Supported network
protocol
Indicators
For a description of the indicators of the RAC-PIU-04GE-SFP board, refer to

Table 9-65 Description of the Indicators on the Panel of the RAC-PIU-04GE-SFP Board

Indicator
RUN
ALM
SJ-20150204153047-004|2015-03-30 (R1.0)
Table 9-64.
Description
LC-type SFP optical module interface
Full duplex
IEEE802.3z Gigabit Ethernet standard
Ethernet Frame
Ethernet
Color Description
Green The indicator is lit when the board is operating properly.
Red The indicator is lit if the board produces an alarm.
9-34
Figure 9-22.
ZTE Proprietary and Confidential
Table 9-65.