ZXR10 ZSR V2 Hardware Description
Note:
Both of the ZXR10 1800-2S(G) and the ZXR10 1800-2S(W) support the wireless function.
Each of them is configured with a wireless module and a pair of antennas. If no wireless
module is configured, the chassis has no antenna.
For a description of the ZXR10 1800-2S rear panel, refer to
Table 4-3 ZXR10 1800-2S Rear Panel Descriptions
Component
ANT1–2
OAM
CON
CON/AUX
GE1–4
COMBO, GE5–6
SIM CARD
LNK/ACT
4.1.2 Slot Layout
For a front view of the ZXR10 1800-2S chassis, see
Figure 4-4 Front View of the ZXR10 1800-2S Chassis
The ZXR10 1800-2S chassis provides two service slots and boards are horizontally
installed in the chassis.
SJ-20150204153047-004|2015-03-30 (R1.0)
Silk Screen Name
Description
Antenna interface
Antenna slot, where an antenna is installed if a
wireless module is configured.
Network interface
Network port (10M/100M/1000M) used for system
(RJ45)
maintenance and program downloading.
Micro USB interface
Micro USB console interface. The functions are the
same as those of the RJ45 CON/AUX interface.
Either of the Micro USB console interface or the RJ45
CON/AUX interface is used. The priority is high.
Serial port (RJ45)
Debugging port for system management and
configuration.
GE electrical
4 GE electrical interfaces.
interface
Combo interface
2 electrical/optical combo interfaces.
SIM card interface
SIM card interface for supporting GSM, CDMA2000,
WCDMA, TD-SCDMA, or LTE networks.
Indicator
Link status indicators in green for the two Combo
interfaces.
4-4
Table
4-3.
Figure
4-4.
ZTE Proprietary and Confidential