Structure; Figure 3-1 Main Components On The Front Side Of The Zxr10 2800-4 Chassis - Zte ZXR10 1800-2S Hardware Description

Chapter 3
ZXR10 2800-4 Chassis
The ZXR10 ZSR V2 series routers are highly flexible by using the modular structure, and
the boards and components are hot swappable. The entire router consists of the chassis,
backplane, MPFU, line interface boards, power supply modules, and fan modules.
The ZXR10 2800-4 chassis uses the plate metal structure. The boards, power supply
modules, and fan modules are installed on the front panel, and the front leading-out mode
(optical fiber interfaces) is used. The width of the ZXR10 2800-4 chassis complies with
the 19-inch standard and can be installed in IEC297 or ETSI standard cabinets.
Table of Contents

Structure ....................................................................................................................3-1

Power Supply .............................................................................................................3-3
Fan ............................................................................................................................3-6
3.1 Structure
3.1.1 Overview and Structure
The height of the ZXR10 2800-4 chassis is 2U (1U = 1.75 in. = 44.45 mm), and the
dimensions (width × height × depth) are 17.41 in. × 3.46 in. × 7.88 in. (442 mm × 88 mm
× 200 mm). For the main components of the ZXR10 2800-4 chassis, see

Figure 3-1 Main Components on the Front Side of the ZXR10 2800-4 Chassis

For the front view of the ZXR10 2800-4 chassis, see
SJ-20150204153047-004|2015-03-30 (R1.0)
Figure
3-1
ZTE Proprietary and Confidential
Figure 3-1.
3-2.