Panel
For the panel of the RAC-SPIU-02UE1-120 board, see
Figure 9-4 Front Panel of the RAC-SPIU-02UE1-120 Board
Interface Property
The RAC-SPIU-02UE1-120 board provides RJ48 interfaces, and it only supports 120 ohm
E1 interfaces. For a description of the interface properties, refer to
Table 9-11 Interface Properties of the RAC-SPIU-02UE1-120 Board
Property
Connector type
Operational mode
Applied standard
Supported link protocol
Supported network
protocol
Indicators
For a description of the indicators of the RAC-SPIU-02UE1-120 board, refer to
Table 9-12 Description of the Indicators on the Panel of the RAC-SPIU-02UE1-120 Board
Indicator
RUN
LNK1/LNK2
Technical Parameters
For the technical parameters of the RAC-SPIU-02UE1-120 board, refer to
Table 9-13 Technical Parameters of the RAC-SPIU-02UE1-120 Board
Parameter
Silk screen name
Dimensions (W ×H × D)
Power consumption
Weight
SJ-20150204153047-004|2015-03-30 (R1.0)
Description
RJ48
Full duplex
ITU-T
G.703, G.704
PPP, ML-PPP, HDLC,
IP
Color
Description
Green
The indicator is lit when the board is operating properly.
The indicator is lit when the link is operating properly, and is
Green
not lit when the link is idle.
Specification
RAC-SPIU-02UE1-120
3.86 in. × 0.79 in. × 6.9 in. (98.1 mm ×19.92 mm ×175 mm)
6 W
0.53 lb. (0.24 kg)
9-7
Chapter 9 Line Interface Boards
Figure
9-4.
FR
ZTE Proprietary and Confidential
Table
9-11.
Table
9-12.
Table
9-13.