Ethernet Cables; Figure 10-6 Ethernet Cable - Zte ZXR10 1800-2S Hardware Description

ZXR10 ZSR V2 Hardware Description
RJ45 Pin
5
6
7
8

10.2.3 Ethernet Cables

There are two types of Ethernet cables, crossover cables and straight-through cables.
Straight-through Ethernet cables are used in the following cases:
l
Ethernet connection between ZXR10 ZSR V2 and a line concentrator.
l
Ethernet connection between ZXR10 ZSR V2 and an Ethernet switch.
l Ethernet connection between a computer and a line concentrator.
l Ethernet connection between a computer and an Ethernet switch.
Crossover Ethernet cables are used in the following cases:
l Ethernet connection between two ZXR10 ZSR V2 devices.
l Ethernet connection between ZXR10 ZSR V2 and a computer Ethernet card.
l
Ethernet connection between two line concentrators.
l
Ethernet connection between a line concentrator and an Ethernet switch.
l
Ethernet connection between two Ethernet switches.
l
Ethernet card connection between two computers.
An Ethernet cable consists of RJ45 connectors and an eight-wire twisted pair cable. For
an overview of the Ethernet cable, see

Figure 10-6 Ethernet cable

1. Ethernet cable connector
For the wiring sequence of the straight-through Ethernet cable, refer to
SJ-20150204153047-004|2015-03-30 (R1.0)
PCB CONSOLE Signal
Signal Direction
GND —
RXD ←
DSR ←
RTS →
2. Standard shielded Ethernet
cable
10-6
DB9 Pin
5
3
4
8
Figure 10-6.
ZTE Proprietary and Confidential
PC DB9 (Hole)
Signal
GND
TXD
DTR
CTS
3. Cable label
Table 10-6.