HP FlexFabric 11908-V Installation Manual page 100

Figure 59 Removing the mounting brackets from the chassis
3. Put the mounting brackets into the box.
Removing the cable management brackets
The 1 1908-V has two cable management brackets—the one on the chassis bottom routes power cables,
and the one on the chassis top routes other cables.
To remove the cable management brackets:
1. Prepare the packing bag of the cable management brackets. Make sure the bag is clean, dry, and
not damaged.
2. Use a Phillips screwdriver to loosen the screws that attach the cable management brackets to the
chassis, and then remove the cable management brackets.
3. Put the cable management brackets into the bag.
94