Introduction To Assembly; Tools Needed - Huffy Coaster Owner's Manual

Introduction to Assembly

This Owner's Manual is made for several diff erent bicycles:
• Some illustrations may vary slightly from the actual product.
• Follow instructions completely.
• If the bicycle has any parts that are not described in this manual, look for separate "Special
Instructions" that are supplied with the bicycle.
• Models may have diff erent accessory items such as bags, baskets, refl ectors, cup holders,
racks, etc.
• All features, components and accessories are not included on all models.
• Use the Index page to locate specifi c sections of this manual.
• Please read through this entire manual before beginning assembly or maintenance.
• If you are not confi dent with assembling this unit, refer to a local bike shop.
WARNING
NOTE: All of the directions (right, left, front, rear, etc.) in this manual are as seen by the rider
while seated on the bicycle.
Do not dispose of the carton and packaging until you complete the assembly of the bicycle.
This can prevent accidentally discarding parts of the bicycle.
Tools Needed (not included)
Small Adjustable Wrench
(Jaws must open at least 9/16 inch.)
Flat-blade Screwdriver
Slip-Joint Pliers
8
: Keep small parts away from children during assembly.
Open-end Wrenches
Phillips Screwdriver
Metric Allen Wrenches